4/22/2015 update
Note: I am building ONE M4 Replica.
So far I have spent 16 years working on it ...
and it is no where near complete.
Do not ask if I have any for sale.
I do not have any machines for sale!


Enigma parts available now for restorations and Collectors.
The Enigma shop


Parts are designed to fit original Enigma machines of type 'jla' Heimsoeth Und Rinke.
However, parts will generally fit other manufacturers machines of that era such as 'aye'.
New Reproduction items:
 
 
Lamp Bezel...
Dual Rotor Box...
Rotor Window Bezels...
 

 

 
 
Available special order are reproduction Rotor Levers, $100.00 each
 
Available special order are reproduction Rotor Covers for Army and GAF - 3 Wheel Machines.

Hinge and pin are included. Window Bezels are Laser Cut.

Special Order Cost $220.00 USD
Allow 8 weeks for delivery

Rotor Cover
Hold-Downs


These Hold-downs were drawn from an original Enigma Hold-down to exacting specifications on AutoCAD and machined.

Spring loaded. Cost per set, as shown, $250.00 USD

Special Order
Allow 8 weeks for delivery

New Window Bezels:

New Window Bezels are Laser Cut.
These are Included with the Rotor Cover. .

Sold Separately :
Cost per set of 3, $30.00 USD

View Cart:

 
New
$30.00
New for Enigma-E electronic kits...
Rubber Stamps available:
'Klappe schliessen' or
' Klappe schließen ' (double s ligature)
This is a smaller rubber stamp for the "Enigma-E kits".
Scaled 21.8% for Enigma-E kits
imprint size 38 x 21mm.
Klappe schliessen stamp, small: $30.00
These stamps are usually found on the front 'Flap' of many Enigma machines.


$50.00


New
$50.00



New Rubber Stamps available:
'Klappe schliessen' or
'Klappe schließen'
This is a standard size rubber stamp.
Imprint size 70.5mm x 28mm

'Enigma' is standard size imprint: 58mm x 30.5mm

Klappe schliessen stamp $50.00
These stamps are usually found on the front 'Flap' of many Enigma machines like the one at the National Cryptologic museum.

These hand made stamp handles offer uniqueness and solid construction of exotic wood.
Coated with polyurethane.


Showing Position of Stamps


Enigma Blue-Green Filter

Measures 224mm x 61mm

Temporarily Out of Stock
Price $250.00 each


Analysis of original M4 filter on
Tungsten Deuterium Color Spectrometer





Enigma Blue-Green Filter
Special production Blue-Green Optical Polymer Filters for
M3 and M4 Enigmas.

Measures 224mm x 61mm


Plotted from original M4 filter on
Tungsten Deuterium Color Spectrometer



Approximate color only due
to web and monitor variations.

Below is a 'New' filter with the
protective paper still on.
Huge schematics of Enigma

11" x 17 " shown

Price $10.00 per sheet

Drawn in AutoCAD from original schematic. Uses fratur fonts.
Shows current flow in the encryption path, plugs and battery circuits.
For M3 and M4 Enigmas.


Size Large:
Measures: 11 " x 17 "
(279.4mm x 431.8mm)
Note this schematic is included in the Expanded Educational package.

'Stecker' Cable
$225.00


Kriegsmarine (Navy) Stecker


'Stecker' Cable:
For those collectors who have need of Steckers:
Said to be indistinguishable from an original
this is the first production quality Stecker.
Molded directly from an original M4 Enigma Stecker.
It is 25cm plug center to center, 12mm pin spacing.
-Cotton/polyester braided jacket-
-Internal Stain relief-
Stecker cable price $225.00 per cable.
Specify Army or Navy machine type since pins are different length.


'Steckerbrett' Shorting bar


Shorting bar price $180.00 each


'Steckerbrett' Shorting bar:
Nickel plated steel with
Nickel plated H02 brass contact.
12mm center to center,
fits behind the Steckerbrett on each Stecker position.
Springs included.

Machined on a watch machine.

Includes the black insulator on the pin.

 

For those collectors who have lost their Stecker nuts:
Stecker slotted nut:
Machined of stainless steel, 2mm tap
Price $10.00 Each
Will fit original Steckers
In stock ready to ship.


Navy wheel inner locking sleeve
Rebuilding a Navy Wheel?
Here is a NEW Locking Sleeve:
Machined of H02 half-hard brass
Locking Sleeve price $100.00 each
Will fit an original Kriegsmarine Navy Wheel
In stock ready to ship.


Rotor Shaft :
Shaft is 7mm Diameter - 92mm long
End flange 9mm Diameter (8.96mm for clearance)
Machined of steel
Price $50.00 Each
Made to Order.